Looking for:
Create a Roof by Extrusion | Revit | Autodesk Knowledge Network – Gable Roof
You can also add fascia to model lines. Soffits Use the Roof Soffit tool to model the underside of a building element. Gutters You can add gutters to edges of roofs, soffits, and fascia.
You can also add gutters to model lines. Dormers Create dormers to enhance and expand a roof. Note: For the example where the roof has been shape edited, the shape editing tools will display in the contextual tab of the ribbon.
Hip Roof All edges of the sketch are set to be slope defining. Gable Roof 2 edges of the sketch are set to be slope defining. Shed Roof 1 edge of the sketch is set to be slope defining. Flat Roof None of the edges are set to be slope defining. Slope Arrow Use a slope arrow to create a slope on a roof.
Shape Edited Roof Shape editing allows for points and edges to be positioned independently. Barrel Vault Roof by Extrusion extrudes based on the shape of a sketched edge. Roof Sketch Modifications Change the properties of sketch lines used in roof elements to affect the geometry.
Combined Roof The example model uses a combination of roof elements to compose the overall roof. On the Options Bar, select Extend to wall core if you want the overhang to be measured from the core of the wall, and then specify a value for Overhang. Completed gable roof with overhang. You can place curtain grids on the curtain panels of the sloped glazing. After creating a roof, you can change its shape or overhang, cut openings, or align ridges. If you want to change the position of the roof, use the Properties palette to edit the Base Level and Offset properties to change the position of the reference plane.
Use this method to resize roofs that were created by footprint or by face. When editing the footprint of a roof, modify properties of its boundary lines to change the roof overhang.
A plan view representation of the roof displays. Reference planes define the boundary of the roof. You can align roof ridges in 3D and elevation views. To align roof ridges in an elevation view, use the Align tool.
Modify a Roof | Revit | Autodesk Knowledge Network.Autodesk Revit BIM Families – NBS National BIM Library
Creates a roof by extruding a profile that you sketch. Display an elevation, 3D, or section view. Click Architecture tab Build panel Roof. Edit the roof sketch. Select the roof, and click Modify | Roofs tab Mode panel (Edit Footprint) or (Edit Profile). Make necessary changes.
Autodesk revit 2017 roof free.Autodesk Revit 2017 Content
When a roof line is set to slope defining, this symbol appears adjacent to it. This property specifies the distance above or below the level at which the roof is cut off. Creates a roof using the building footprint to define its boundaries. Display a floor plan view or a reflected ceiling plan view. Note: If you try to add a roof on the lowest level, a dialog prompts you to move it to a higher level.
If you choose not to move the roof to a different level, Revit notifies you later if the roof is too low. Tip: When using Pick Walls, you can specify the overhang before you sketch the roof. On the Options Bar, select Extend to wall core if you want the overhang to be measured from the core of the wall, and then specify a value for Overhang.
Completed gable roof with overhang. You can place curtain grids on the curtain panels of the sloped glazing. Press Tab to switch between horizontal and vertical grids. Add a roof to another roof To cut off a roof in order to sketch another roof on top of it, select the roof in the drawing area. Sketch the new roof on top of the existing roof. Parent topic: Roofs.